AffordableWindPower.com Home Contact Us:
(715) 869-2959

hwojnick1at@gmail.com
AWP-banner2-lite.png
secure_payments.png Individual Items and Accessories from Affordable Wind Power.com
Item Price Shipping
1800 watt wind turbine picture

1800 Watt Wind Turbine 

This is a “heavy-duty” commercial grade Wind Turbine. Has a start-up speed of 5.6MPH and weighs only 92lbs. Rated power is 1500 watts at 24 MPH with a maximum output of 1800 watts at 29 MPH. Unit can be used as a Grid-tie or to charge 48 volt battery packs. Lifespan is approximately 20 years. The turbine has a 4 bolt flat mounting plate that can be screwed into a wood mount (typically a 6”x6”) or mounted on a metal pole (2” pipe adaptor available). Has a 2 year Warranty.  Will survive a 102 MPH wind with no damage.

$1420 $80
1600wattTurbine.jpg

1600 Watt Wind Turbine

This is a “heavy-duty” commercial grade Wind Turbine. The rated lifespan is 20 years. Rotor diameter is 10 feet, 6 inches. Mounts on a 3” pipe and has a 4.8 MPH start-up speed. Rated power is 1000 watts with a 1600 watt maximum output, at 32 MPH wind speed. Output voltage is 48V AC 3 phase. Note: 24V AC is available by special order. Weight 134lbs. Has a 2 year Warranty. Uses: charge 48 volt battery packs or produce 120V AC current as a Grid-Tie. Wind survival speed 130 MPH.

$1249 $155
600wattTurbine.jpg

600 Watt Wind Turbine

This is a compact unit that weighs 17.6 lbs. The rated lifespan is 15 years. Rotor diameter is 4 feet. Mounts on a 1.5” pipe and has a 4.5 MPH start-up speed. Rated power is 400 watts with a 600 watt maximum output, at 24 MPH. Output voltage is 24V AC 3 phase. Users may charge either 12 or 24V DC battery packs or with a Grid-tie produce 120V AC current to feed their grid. Has a 2 year Warranty. Wind survival speed is 100 MPH.

$379 $30
1500w_gridtie.jpg

1500 Watt 120V AC Grid Intertie

This unit converts 45V-90V AC 3phase input current to 120V AC output current to feed your grid and reduce your electrical consumption. Rated AC output is 1350 watts with a maximum output of 1600 watts. Pure sine wave output. The Grid-Tie is stackable with Island Protection. Weight 15.4 lbs. Has a 1 year  Warranty. Item requires use of a Dump Load resistor to operate properly. Note: this item is supplied in the 1600 watt Wind Turbine Kit6

$399 $19
1000 watt 120 volt AC Grid Intertie picture

1000 Watt 120V AC Grid Intertie

The Grid Intertie is used to convert Wind Turbine electrical energy into 120vac current. Rated AC output is 900 watts. Maximum AC output is 1100 watts. Weight 12.1 lb. Unit is “stackable” with Island Protection. Has a 1 year Warranty. 

$309 $16
600w_grid-intertie.JPG

600 Watt 120V AC Grid Intertie

This unit converts 22V-60V AC 3phase input current to 120V AC output to feed your grid and reduce your electrical consumption. Rated AC output is 540 watts with a maximum output of 600 watts. Pure sine wave output. The Grid-Tie is stackable with Island Protection. Weight 8.4 lbs. Has a 1 year warranty. Items requires the use of a Dump Load resistor to operate properly. Note: this item is supplied in the 600 watt Wind Turbine Kit.

$269 $13
Picture of 8000 Watt Pure Sing Wave Inverter

8000 Watt Pure Sine Wave Inverter

Here it is a 8000w continuous with a 32000w surge capacity for starting heavy loads. Split Phase – this means you can have 110v and 220v at the same time! Has a 1-year warranty for residential use. Models are available in either 12v DC input or 24v DC input. Output is 110v AC and 220v AC at the same time! Note: you can ONLY obtain 4000w 120v and 4000w 220v concurrently. Also has a battery charging function at a 120-amp rate. (Available with 220v output only.)

$585 FREE
Picture of 5000 watt Pure Sign Wave Inverter

5000 Watt Pure Sine Wave Inverter

Here it is a 5000w continuous with a 20000w surge capacity for starting heavy loads. Has a 20000 watt surge capacity!  Has a 1 year warranty for residential use. Models are available in either 12v DC input or 24v DC input. Output can be either 110v AC or 220v AC. Also has a battery charging function at an 80 amp capacity.

$485 FREE
Picture of anemometer

High-end digital Anemometer - measures wind speed

If you need to know your windspeed, this item is for you. Hand-held or can be mounted to a tripod, secured to a railing, or duct taped to a stick. Features a twenty-first century digital readout. Accuracy is within 5%. Scale can be set in: MPH, M/S, Ft/min., Knots or Km/hr. Has a backlit display. Also calculates: temperature, current wind velocity, average wind velocity, maximum wind velocity and wind chill. Can be set for F or C temperature scale. Operates on a 9V battery.

$22 FREE

You must call (715) 869-2959
to order

200 watt 48 volt DC Charge Controller picture

2000 watt rated 48 volt DC Charge Controller

The Charge Controller converts the AC output of the Wind Turbine to 48V DC current to charge batteries. Rated output is 2000 watts. Maximum output is 2400 watts. Waterproof with a weight of 3.6lb.Has a 1 year warranty.

$279 $12
1000W48V-ChargeController_ComboPix.jpg

1000 watt rated 48 volt DC Charge Controller

Designed to charge 48V DC battery packs. DC output Amps ranges from 0.1 to 20.08 Amps max. Rated output is 1000 watts rated to 1600 watts maximum. Weight is 2.65 lbs. Input voltage is 48V AC 3 phase. Brake start voltage is 60V. Brake recovery voltage is 54V. Unit is waterproof. Has an LED display. Has a 1 year warranty.

$145 $9
12-24V_Controller2.png

12/24 volt DC Charge Controller

Designed to charge either 12 or 24 volt battery packs. DC output is 16 amps maximum at 12 volts or 10 amps maximum at 24 volts. Rated output is 400 watts with a 600 watt maximum. Weight is 2.5 lbs. Input voltage is 24V AC 3 phase. Brake start voltage is 15V at 12 volts DC or 30V at 24 volts DC. Brake recovery voltage is 12.5V at 12 volts DC or 27V at 24 volts DC. Unit is waterproof. Has a 1 year warranty.

$55 $7
12V_controller.JPG

12 volt DC Charge Controller

Designed to charge 12 volt batteries. DC output is 16 amps maximum at 12 volts. Rated output is 400 watts with a 600 watt maximum. Weight is 2.5 lbs. Input voltage can be from 12 to 24 volts 3 phase AC. Brake start voltage is 15V. Brake recovery voltage is 12.5V. Unit is waterproof. Has a 1 year warranty.

$45 $7
dump_load_resistor.jpg

Dump Load Resistor

This is utilized as a safety feature for the Grid-Tie 1600 Watt Wind Turbines and the 600 Watt Wind Turbines. Dump Loads prevent “over speed” conditions from destroying your Wind Turbine. Dump Loads “must” be mounted on a non-combustible surface. A 1 year warranty is provided. The 1.5 Ohm resistor is recommended for the 600 Watt Wind Turbine and the 3.0 Ohm resistor is recommended for the 1600 Watt Wind Turbine. Please inform us as to Ohm’s desired when placing your order.

$35 $9
Two inch pipe adaptor for 1800 watt turbine

2" Pipe Adapter for the 1800 watt Turbine

This adaptor will allow you to convert the kit provided 4 bolt flat mount, to screw on to a 2” inch Schedule 40 galvanized pipe section. It is recommended that if a free-standing tower is utilized that the Wind Turbine be at least 30’ feet from ground level. If mounted on the top of a structure the minimum height recommended is 12’ feet. Weighs approximately 12lbs. This is a custom made item. 

$59 $12

Shipping - all quoted shipping costs are to the lower 48 states only. Alaska and Hawaii residents - please contact us for rates before placing an order.

AffordableWindPower.com Home checkout_wPP+cards_button.png



AffordableWindPower.com is a wholly owned subsidiary of:

Affordable Toys, LLC
919 County Road J
Stevens Point, WI, US 54482
Contact Us:
(715) 869-2959
hwojnick1at@gmail.com